We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Injection Probe.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Injection Probe - List of Manufacturers, Suppliers, Companies and Products

Injection Probe Product List

1～3 item / All 3 items

Displayed results
High-frequency surge test injection probe (0.01μF, 470pF)

High-frequency surge test injection probe (0.01μF, 470pF)

Testing for high-frequency surge resistance of automotive electronic components is possible! Used in combination with decoupling coils.

This product is a probe designed to directly inject noise at any location, in combination with an impulse noise tester and a damped vibration wave tester. It can conduct tests for high-frequency surge resistance (burst waveform) and high-frequency surge resistance (impulse waveform) of automotive electronic components. It is used in combination with a coil for decoupling. 【Specifications】 ■ Coupling capacitor: 470pF, 0.01μF ■ Cable length: 0.7m (coaxial part 0.6m, exposed part 0.1m) ■ Compatible testers: - SECS-931SD - FNS-AX3 series, FNS-AX4 series *For more details, please refer to the PDF document or feel free to contact us.

  • EMC Testing
  • Testing Equipment and Devices
  • EMC/Static electricity measuring equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Snap-on bulk current injection probe for industrial products

Snap-on bulk current injection probe for industrial products

Designed for conducted immunity testing primarily in the frequency range of 150 kHz to 230 MHz, in accordance with the standard IEC/EN61000-4-6.

**Product Overview** The TBBCI1-200K280 is a Snap-On bulk current injection probe. The BCI probe is designed primarily for conductive immunity testing in the frequency range of 150 kHz to 230 MHz, in accordance with the standard IEC / EN 61000-4-6. The insertion loss is 8 dB over most of the bandwidth, fully complying with the insertion loss specifications of IEC / EN 61000-4-6. The probe is individually characterized and can be used in the frequency range of 10 kHz to 300 MHz. According to IEC/EN 61000-4-6, it can inject into conductive immunity test setups at severity levels 1, 2, 3, and level X, up to 30V. This probe can also be used for RF current monitoring applications. The opening of the RF current monitoring probe is 27 mm. The standard insertion loss is 8 dB, and the standard transfer impedance is 26 dB ohms.

  • Other electronic measuring instruments
  • EMC Testing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Snap-on bulk current injection probe for automotive products

Snap-on bulk current injection probe for automotive products

Designed for conducted immunity testing of automotive products primarily in the frequency range of 1MHz to 400MHz according to standard ISO11452-4.

**Product Overview** The TBBCI1-800K420 is a Snap-On bulk current injection probe. The BCI probe is designed primarily for conducting immunity testing of automotive products in accordance with standard ISO11452-4, mainly in the frequency range of 1 MHz to 400 MHz. The insertion loss is 5 dB over most of the bandwidth. It complies with the insertion loss specifications of ISO11452-4 in the frequency range of 250 kHz to 230 MHz. The probe is individually characterized and can be used in the frequency range of 10 kHz to 450 MHz. This probe can be used for injections of severity I (60mA), II (100mA), III (150mA), IV (200mA), and customer-specific severity V (up to 350 mA). This probe can also be used for RF current monitoring applications. The opening of the RF current monitoring probe is 27 mm. The standard insertion loss is 5 dB, and the standard transfer impedance is 26 dB ohms.

  • Other electronic measuring instruments
  • EMC Testing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of Injection Probe

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.